Setting up a Brick Paver Walkway or Bricks Stones

The usage of Setting up a Brick Paver Walkway or Eco Brick or Pavers to create a walkway or outdoor patio complements a home in a manner in which is unequaled. It includes a level of quality and elegance to a house entrance that can not be attained with either concrete or asphalt. Brick and Pavers likewise can be found in several colors and shapes permitting for special color plans and patterns to be attained. In addition, setting up a Brick or Paver sidewalk does not always require a pro. With some basic understanding and a fairly easy walkway strategy, a house owner is capable of carrying out such a job.

The secret to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be installed. The location ought to be dug out a minimum of a foot down, eliminating all topsoil and clay soil. In addition, string lines should be strung on each side of the sidewalk. The string lines show the finished height of the sidewalk.
When the location has been dug, 3/4" gravel stone must be laid in and tamped down securely. Then 2" of sand, or stone dust need to be spread over the gravel. Again the sand/stone dust ought to be tamped down. Stone dust is preferred. The height between the tamped down sand and the stringline need to equal the thickness of the brick or paver.

Now that you have a steady base, position a 1" pipe or journal board the length of the sidewalk on either side of the walkway. Then using a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a work on both sides of the ready area. These strips will serve as your sidewalk border and help to keep the integrity and shape of the pathway. You can get these plastic strip borders at the majority of home enhancement shops. The strips need to be anchored down with 12" galvinized nails. You check here ought to sink these nails into the ground and through the strips every foot.

You can then begin to lay the bricks/pavers once this is done. There are many patterns you can lay. I particularly like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the stability of the pathway.

Inevitably bricks/pavers will need to be cut or split when constructing the sidewalk. Unless you want to buy or lease a costly wetsaw, I would suggest purchasing a basic brick/paver splitter. It is generally a chisel with a wide end that is the width of the bricks/pavers. To in fact cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you desire to break the brick. Then using a hammer strike the butt end of the sculpt firmly. You may require to do this a number of times. You may also wish to flip the brick/paver over and strike the opposite of the brick using the hammer and chisle. Within one or 2 strikes the brick/paver should break cleanly. If your pathway has curves you more info will require to buy/rent a wetsaw.

After installing the bricks, develop the outside edges with extra sand, and after that shovel in the topsoil and pack down strongly.
Spread stone dust over the new pathway and sweep into the fractures. This will finish the interlocking of the bricks and help to get rid of any weed development.


In addition, setting up a Brick or Paver walkway does not necessarily need a pro. The secret to installing a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, put a 1" pipeline or journal board the length of the sidewalk on either side of the walkway. These strips will act as your walkway border and assistance to preserve the stability and shape of the sidewalk. Undoubtedly bricks/pavers will need to be cut or split when building the pathway.

Leave a Reply

Your email address will not be published. Required fields are marked *